What the image to STL converter does
You give it a picture. It gives you an STL file you can slice and print. Nothing in between needs CAD, a plugin or an account.
The converter reads your image as a grid of brightness values and turns each one into a height. Light pixels become one thickness, dark pixels become another, and the result is a solid, closed mesh with a flat back — a relief you can print as a plaque, a coaster, a pendant or a backlit lithophane. Because every pixel becomes geometry, the model carries real detail: strands of hair, brick texture, the edges of a logo.
The whole thing runs in this browser tab. The file goes from your disk to the canvas to the STL downloader without ever touching a server, which is why there is no upload button and no account.
Three steps to a printable STL
1. Pick a picture
Anything with contrast works: a portrait, a pet photo, a logo, a line drawing, a scanned page. Holiday snaps with a busy background print as mush, so crop to the subject first. Transparent PNGs are flattened onto white before conversion — on a lithophane, transparent areas end up as the thin end of the thickness range.
2. Set the size and the depth
Width sets the printed footprint. Base thickness is the plastic that stays under everything; relief height is how far the brightest (or darkest) point rises above it. A 100 mm wide plaque with a 1.2 mm base and 3 mm of relief is a good starting point for a 0.4 mm nozzle. Small models need more relief to read; big ones need more base so they do not warp.
3. Download and slice
The button writes a standard binary STL. Drop it into Cura, PrusaSlicer, Bambu Studio, Orca or whatever you already use. There is no watermark, no export limit and no pro tier of the file itself.
How the heightmap works
A photograph is a grid of colours. The converter collapses each pixel to one brightness value (red, green and blue weighted the way the eye sees them), scales that value into the range you set between the base thickness and the maximum height, and builds a surface where every grid point sits at its own height. Four walls and a flat bottom close that surface into a watertight solid, which is what a slicer needs to fill it correctly.
The detail setting controls that grid: 120 px for quick tests, 200 px for most portraits, 300 px when the picture carries fine texture. Higher detail means more triangles and a bigger file — roughly 8 MB at 200 px for a square image, closer to 18 MB at 300 px.
Relief or lithophane?
The two modes use the same geometry and turn brightness into thickness in opposite directions.
- Relief — bright pixels stand up. Print it as a plaque, a keychain or a stamp; you see the picture under normal light.
- Lithophane — dark pixels get thicker. Print it thin in white filament and hold it up to a lamp: the image appears because more plastic blocks more light.
Picking the wrong one does not break anything, it just mirrors the picture. Flip it with the invert checkbox instead of reconverting.
What people convert with it
Portraits and pets are the bulk of it, because a photo of a person or an animal already has the contrast a relief needs. Logos, badges and icons work when they are chunky and high-contrast — thin hairlines and gradients get lost at print scale. Keepsakes, map contours, classroom art and small gifts all print from the same mesh.
What it does not do: it does not rebuild a full 3D object from a single photo, and it does not read a 3MF container. It turns flat pictures into printable height. If you already have a mesh, open it in the STL viewer.
Printer and slicer notes
- 0.4 mm nozzle, 0.12–0.2 mm layers for reliefs; 0.08–0.12 mm for lithophanes.
- Print a lithophane standing up, with a brim, never flat on its back.
- 100% infill for lithophanes; 15–20% is plenty for a plaque.
- White or natural filament for lithophanes, anything for reliefs.
- The model arrives in millimetres, so do not rescale it in the slicer unless you want a different footprint.
Convert by file type
Every image format goes through the same converter: PNG to STL, JPG to STL, JPEG to STL, SVG to STL, photo to STL, picture to STL. If you are setting up a backlit print, start from the lithophane maker. For letters rather than pictures, use the text to STL generator.